Mon - Fri
9:00AM - 6:00PM
+20 11 283 88 886
+97 15 665 45 951
Giza – Egypt
Sharjah – UAE
CM5 is fully backwards compatible with ECM30/60 and ECM DI30/60.
For basic usage, a quick set-up menu is provided to set-up the generator to function as an ECM30/60.
The menu is available in English, German, French and Italian.
The new standard function Current Control will enable you to set a constant current vs a constant voltage.
This will provide you with much more stable charging and will compensate for contamination and emitter pin wear automatically.
The Advanced Current Control is a revolutionary new feature it enables the generator to monitor the supplied current to the electrode. It senses when there is no material to be charged and switches the current to a safe low level.
This prevents arcing and emitter pin wear.
When a material is reinserted the current will automatically switch back to the required high level.
Should your application require it, a serial bus interface can be fitted to enable the generator to communicate through serial bus interfaces such as Profibus or CANopen (Other serial protocol available on request).
Advanced Output Control is optionally available for specific applications. This function provides output control that is proportional to an input signal e.g. the level of charging can be proportional to the speed of your machine.
Save time with better blow off capability
Up to 25 times blow off power
Reduce operating costs due to compressed air usage by up to 80%
Reduce noise levels by as much as 60% compared to non-amplifying nozzles
Reach tight spaces with effective blow off
Better positioning to target with flexible nozzles
Blow off multiple or changing locations with flexible nozzles
Full range of designs, sizes and force/thrust levels.
Flexible nozzles allow better positioning.
Adjustable nozzles enable varying power/thrust levels for each blow off job.
Power/thrust levels ranging from 3 – 72 oz-force.
Air stream sizes at nozzle ranging from 3/16” to 1”.
Meet OSHA noise guidelines; reduces noise compared to open copper tubes and drilled pipe.
Meet OSHA 1910.242(b) dead-end pressure guidelines.
Models 1200 and 1200SS
Threaded connection ideal for blow gun and manifold installations.
Adjustable output flow and thrust of 3 – 21 oz-force.
Airstream size of 5/8” at nozzle.
Airstream size of 3 ½” at 12” from nozzle.
Available in aluminum and stainless steel models.
Model 1201
Threaded connection ideal for blow gun and manifold installations.
Adjustable output flow and thrust of 3 – 21 oz-force.
Airstream size of 5/8” at nozzle.
Airstream size of 3 ½” at 12” from nozzle.
Available in aluminum and stainless steel models.
Model 1201F-12
1201 nozzle with a flexible rubber hose.
Holds position under full line pressure.
Fixed thrust of 6 oz-f.
Airstream size of 3/16” at nozzle.
Airstream size of 3 ¼” at 12” from nozzles.
| Model# | 1200 | 1200SS | 1201 | 1201F-12 | 1202 |
|---|---|---|---|---|---|
| Thrust, oz. | 3-21 | 3-21 | 6 | 6 | 20 |
| Air Amplification | 25 | 25 | 25 | 25 | 25 |
| Air stream at nozzle (inch) | 5/8 | 5/8 | 3/16 | 3/16 | 3/16 |
| Air stream at 12" (inch) | 3.5 | 3.5 | 3.25 | 3.25 | 3.25 |
| Air Consumption (scfm) | 8-26 | 8-26 | 9 | 9 | 23 |
| Model# | 1203 | 1204 | 1205 | 1206 | 1220 |
|---|---|---|---|---|---|
| Thrust, oz. | 9 | 9 | 28 | 28 | 72 |
| Air Amplification | 25 | 25 | 25 | 25 | 25 |
| Air stream at nozzle (inch) | 1/4 | 1/4 | 1/4 | 1/4 | 1 |
| Air stream at 12" (inch) | 3.25 | 3.25 | 3.25 | 3.25 | 5 |
| Air Consumption (scfm) | 13 | 13 | 31 | 31 | 120 |
